ADS Environmental Services Model 4000 530017 A0 - Manual (Page 70)

4-1
C H A P T E R 4
Communication and Activation
After installing the sensors in the pipe and connecting the sensors
to the monitor, it is necessary to establish communication with the
monitor (through telemetry or the direct modem interface) and
activate the monitor. This chapter contains instructions on
establishing telephone service at the monitor location for
communicating with the monitor from a remote location and using
the direct modem interface (DMI) cable to communicate with the
monitor at on site. It also includes basic information concerning
monitor activation.
Note: Manhole and sewer system work involves
confined space entry and is inherently dangerous.
Therefore, installers and technicians must comply with all
federal, state, and municipal regulations concerning
confined space entry. ADS
 is not responsible for any
injuries, damages, claims, or liability resulting directly or
indirectly from the use of this installation guide or the
installation of any ADS equipment.