Great Plains 8560 FCF Assembly Manual - Manual (Page 28)

24 8323-8560FCC Great Plains Manufacturing, Inc.
560-483Q-ENG 02/10/2014
Completing Setup
148.The decals may now be installed.
149.See appropriate pages for decals in the “Parts Man-
ual” for decal placement.
150.To install new decals:
151.Clean the area on which the decal is to be placed.
152.Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
153.Slowly peel away top protective covering being care-
ful not to pull decal from implement.
154.If machine has an optional finishing attachment,
refer to the “Parts Manual” for parts break down, and
attachment layout drawings of this manual.
155.Be sure to consult the operating instructions, “Oper-
ator’s Manual”, for the first time field adjustments
before going to the field.