Great Plains 8560 FCF Assembly Manual - Manual (Page 18)

14 8323-8560FCC Great Plains Manufacturing, Inc.
560-483Q-ENG 02/10/2014
Install 5-Section Outside Wings
Refer to Figure 14
75. Align holes in outside wing hinge
with hole in LH
and RH outside wing , secure with 1 x 5 1/2 hex
bolt , 5/8 lock washers, 5/8 nuts and two 5/8 x 3 1/
32 x 5 u-bolts , 5/8 lock nuts. Fasten the front out-
side wing hinge to wing brace the same way.
76. Carefully align holes in wing hinges with holes in
fold brackets. Secure with 1 1/4 x 7 Gr. 8 hex bolt
and 1 1/4 top lock nut.
77. Attach outside wing brace to front side of wing
frame with 3/4 x 2 hex bolts , 3/4 lock washers, 3/4
hex nuts.
78. Attach bolt-on stub to side of wing brace and front
of wing frame with 5/8 x 4 1/32 x 4 1/4 u-bolts , 5/8
lock washers and 5/8 nuts
79. Attach holes in wheel arm L , to wing frame ,
secure with 1 1/4 x 6 pin , 3/8 x 2 1/4 hex bolts and
3/8 top lock nuts.
80. Attach base end of 3.25 x 8 x 1.25 lift cylinder (mod-
els 8539-8548) or 3.50 x 8 x 1.325lift cylinder (mod-
els 8551-8560)
to front hole of cylinder mount
plate with 1 x 3 1/8 pin , 1.5 x 1.0 x.075 machine
washer and 3/16 x 2 cotter pin. Attach rod end of cyl-
inder
to torque tube lever with 1 x 3 1/8 pin , 1.5
x 1.0 x.075 machine washer and 3/16 x 2 cotter pin.
81. Mount bottom of 180 fold rocker to wing hinge
with 1 x 3 1/8 clevis pin , 1.5 x 1.0 x.075 machine
washer and 3/16 x 2 cotter pin.
82. Attach base end of 4 x 16 x 1.25 cylinders to cen-
ter fold bracket with 1 x 3 1/8 pin , 1.5 x 1.0 x.075
machine washer and 3/16 x 2 cotter pin.
83. Do not attach rod end of fold cylinders until fold sys-
tem has been purged, See “Purging Hydraulic Sys-
tem” on page 22.
84. Attach T bracket to wing frame with 1/2 x 3 1/32 x
5 u-bolts , 1/2 lock washers and 1/2 nuts.
Note: See layout section in “Operator’s Manual” for proper
placement of lock mount .
85. Tighten all bolts to specs, See “Torque Values
Chart” on page 25.
Figure 14
5-Section Outside Wing Assembly
41896
3
18
5
U
D
F
B
L
R
4 2
9
9
13
12
1
16
14
17
15
6
8
1
7
11
19
14
10
1
2
4
5
1
1
6
3
7
8
9
10 2
11
12 13
14
12 14
15 1
16
17
14
18
19
18