Light assembly, Install rear hitch (optional), Light assembly install rear hitch (optional) – Great Plains 8560 FCF Assembly Manual User Manual
Page 27

Great Plains Manufacturing, Inc.
Assembly
23
02/10/2014
560-483Q-ENG
Light Assembly
138.Route light harness 30’ lead
from front of hitch
(tractor plug to front), along same route as hydraulic
hose (fasten in same clamps and hose wraps as
hoses). Plug one end of enhance light harness
to
small end of light harness 30’ lead
. Plug bigger end
of wishbone light harness
into other end of enhance
light module
. Route other ends over towards
(marked left and right) the light mounting brackets as
shown.
139.Mount red lamp lights
to top of light mounting
brackets, with 1/4 x 1 hex bolts
and 1/4 lock nuts.
140.Mount amber lamp lights
to top of light brackets
with 1/4 x 1 hex bolts
and 1/4 lock nuts.
141.Tighten all bolts to specs. Be sure and get all wiring
harnesses fastened up securely with hose wraps or
clamps (if routed close to hydraulic hoses) or use
cable ties
.
Install Rear Hitch (optional)
Refer to Figure 31
Note: The rear tow hitch will be shipped with big compo-
nents banded together and bolts will be in a box.
Carefully un-band the components.
142.Attach left
and right
rear hitch arms, rear hitch
truss
, rear truss support
to center frame using 5/
8 x 1 1/2 bolts
, 5/8 x 3 1/32 x 5 1/2 u-bolts
,
secure with 5/8 lock washers and 5/8 nuts.
Note: Do not tighten any bolts until every thing is installed.
143.Now install the rear hitch frame
using 5/8 x 1 1/2
bolts
, 5/8 x 4 1/32 x 4 1/4 u-bolts
, secure with 5/8
lock washers and 5/8 nuts.
144.The bolt on sleeve assembly with rigid or flex slide
,
may be fastened using 5/8 x 3 1/32 x 4 1/2 u-bolt
,
secure with 5/8 lock washers and 5/8 nuts.
145. Tighten all bolts to specs, See “Torque Values
146.If machine is equipped with optional rear hitch acces-
sory kit may be installed as shown in “Parts Manual”.
147.Route hoses and light harness along hitch and frame
with hose clamps and hose wraps, provided.
Note: Be sure hoses and light harness is fastened securely
so they don’t drag or get pinched.
Figure 30
Lights
41897
U
D
F
B
L
R
6
5
2
6
4
5
7
3
4
1
6
1
2
1
3
2
4
6
5
6
7
Figure 31
Rear Tow Hitch
41883
8
7
6
4
1
9
2
9
5
6
6
3
6
10
2
1
4
5
6
7
3
6
8
9
10