Great Plains 2S-2600HDF Operator Manual v1 - Manual (Page 92)

195-440M Table of Contents Index 2014-05-16
88 2S-2600/F/HD/HDF Table of Contents Index Great Plains Manufacturing, Inc.
Options
Hitches
One hitch is selected upon initial order of an 2S-2600HD
Drill, and includes the spring wire loop, safety chain, and
all fasteners. Additional hitches may be ordered for
conversion in the field, and include extra hitch mounting
bolts, lock washers and nuts.
Open Center Conversion
The standard 2S-2600/F/HD/HDF drill is compatible with
tractors having “active” or “closed center” hydraulic
systems. For use with “non-active” or “closed center”
tractors, a conversion kit is available. Order one kit per
drill.
For operations, see “Tractors with Open Center
Hydraulics” on page 18.
Two Outlet Hydraulic Kit
The standard 2S-2600/F/HD/HDF drill requires three
remote outlet circuits on the tractor. If only two are
available, this kit enables the Transport and Opener Lift
circuits to share a single remote, via a selector valve on
the tongue at the hitch. Order one kit per drill.
For operations, see “Lift Selector Valve Operation” on
page 41.
Hitch Description Part Numbers
Large Strap 170-033A
Clevis 196-136A
Smtall Strap 170-034A
27006
1
2
3
1
2
3
Description Part Number
Open Center Hydraulic Kit 194-143A
BASE END
, CENTER OPENERS
ROD END
, CENTER OPENERS
BASE END
, WING OPENERS
ROD END
WING OPENERS
1200 600
0 3000
1800
2400
psi
1200 600
0 3000
1800
2400
psi
P
G
R
T
P
G
R
T
3
1
2
LOWER
TO TRACTOR
RAISE
1
2
3
1
2
3
FILTER
18750
Description Part Number
Two Outlet Tractor Conversion 194-122A
1
2
15550