Safety decals, Safety reflectors and decals, 003c slow moving vehicle reflector – Great Plains 2525A Operator Manual User Manual
Page 9: 266c red reflectors
Great Plains Manufacturing, Inc.
Important Safety Information
5
2013-06-04
118-999M
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request cor-
responding safety decals.
To install new decals:
1.
Clean the area on which the decal is to be placed.
2.
Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-003C
Slow Moving Vehicle Reflector
On the back of the left seed box, near drill center;
1 total
29791_66%
838-266C
Red Reflectors
On rear of walkboards, outside ends,
and near center of each seed box;
four total
29791_66%