Great Plains 2525A Operator Manual - Manual (Page 19)

Great Plains Manufacturing, Inc. Table of Contents Index Preparation and Setup 15
2013-06-04 Table of Contents Index 118-999M
Electrical Hookup
Refer to Figure 4
Make sure tractor is shut down with accessory power off
before making connections.
1. Mate lighting connector to tractor outlet.
2. Option: mate monitor connector to tractor harness.
3. Mate any accessory or aftermarket electrical con-
nectors.
Make connections prior to drill movement. Some drill
hydraulic circuits are under monitor control.
Raise Parking Stands (2025A only)
Refer to Figure 5
1. Use tractor 3-point to raise drill enough to relieve
weight from stands
.
2. Remove pin .
3. Slide stand up in mount .
4. Re-pin at lower stand hole .
Figure 4
Connector Identification
25236
25237
1
2
Figure 5
Model 2025A Parking Stand
26221
3
4
5
6
3
4
5
6