Great Plains 2525A Operator Manual - Manual (Page 22)

18 2025A/2525A Table of Contents Index Great Plains Manufacturing, Inc.
118-999M Table of Contents Index 2013-06-04
Meter and Row Setup
❑ Select and install correct seed disks for crop, popula-
tion and desired field speed.
See Seed Rate Manual for disk selection criteria.
See page 48 for disk installation.
If planting at a non-standard row spacing:
❑
Have blank seed disks (page 86) available for bal-
ancing meter pressure at unused rows, and reducing
meter brush wear.
See page 50 for disk installation.
❑
Have seed tube plugs (page 50) available for block-
ing seed flow to unused rows.
See page 49 for plug installation.
❑ If planting at a non-standard row spacing, have
lock-up pins (page 83) available for reducing wear on
unused rows.
See page 51 for row lock-up.
Marker Setup
Prior to first use, check and adjust:
• “Marker Speed Adjustment” on page 98.
Prior to first use, and whenever changing row spacings,
set or reset:
• “Marker Extension” on page 100.
Prior to each planting session, check and adjust:
• “Marker Chain Adjustment” on page 99
• “Marker Disk Adjustment” on page 34.
29594
26226
27226