Great Plains 1525P Operator Manual - Manual (Page 79)

8/14/2006 118-949M
77 Veris Drive Operating Instructions
Refer to Figure 94
1. Continuing to verify that the drive area
is clear, press the Engage key to start
drive rotation. Pressing Function key
will exit calibration mode.
Refer to Figure 95
2. While the drive is rotating, the display
window shows the time remaining
and the “Out” rate. CONTINUE TO
MONITOR DRIVE AREA DURING
DRIVE ROTATION. PRESS THE EN-
GAGE KEY (OR OFF KEY) TO STOP
DRIVE DURING CALIBRATION
Refer to Figure 96
3. After Calibration meter rotation has
ended, this screen will appear.
Figure 94
22726
Figure 95 22727
Figure 96
22728