Great Plains 1525P Operator Manual - Manual (Page 78)

1525P, 1510HDP
118-949M 8/14/2006
76
Refer to Figure 91
11. The cab console is informing you the
length of time that the drive will be oper-
ating, in order to meter the amount of
seed you have requested, at the calibra-
tion number, drill width, and number of
rows you have selected. Press Function
key to advance to next window.
Refer to Figure 92
!
WARNING
The drive is about to operate, meaning there is a
danger of entanglement if anyone is in the drive
area. Be sure to verify that no one is near the
drive area before advancing to the next step.
Refer to Figure 93
12. Only after you have verified the drive
area is clear, press the up arrow key to
initiate calibration mode. If drive area
isn’t clear, press Down arrow key to exit
calibration mode.
Figure 91
22723
Figure 92 22724
Figure 93
22725