Great Plains 1525P Operator Manual - Manual (Page 77)

8/14/2006 118-949M
75 Veris Drive Operating Instructions
Refer to Figure 88
8. Enter number of rows here using Up/
Down arrow keys. Press Function key
to advance to next window.
Refer to Figure 89
9. Enter your planned planting speed
using Up/Down arrow keys. Calibra-
tion mode will not accept a speed
higher than 10 mph. Press Function
key to advance to next window.
Refer to Figure 90
10. Enter the amount of seed you want to
measure. For volumetric metering,
this should be at least 1/4 of a lb. For
singulated metering, at least 100
seeds should be selected. Press
Function key to advance to next win-
dow.
Figure 88
Figure 89
Figure 90
22720
22721
22722