Great Plains 4000TT Operator Manual - Manual (Page 9)

Great Plains Mfg., Inc. Table of Contents ►
Important Safety Information
3/21/2005 Series I 1000TT- 4000TT Turbo-Till 586-043M
7
Safety Decals
Your implement comes equipped with all safety
decals in place. They were designed to help you
safely operate your implement.
• Read and follow decal directions.
• Keep all safety decals clean and legible.
• Replace all damaged or missing decals. Order
new decals from your Great Plains dealer.
Refer to this section for proper placement.
• When ordering new parts or components, also
request corresponding safety decals.
• To install new decals:
1. Clean the area on which the decal is to be
placed.
2. Peel backing from decal. Press firmly on
surface, being careful not to cause air
bubbles under decal.
Slow Moving Vehicle Emblem
See Parts Manual 586-043P
Quantity 1
Reflector – Amber
838-615C
Quantity 6: Two on light bracket and two on
center frame. Two on rear of finishing
attachment (not shown), visible from side
while folded for transport.
Quantity 4: 1000TT & 1200TT