Great Plains 4000TT Operator Manual - Manual (Page 22)

Section 1: Assembly
Table of Contents ► Great Plains Mfg., Inc.
Series I 1000TT- 4000TT Turbo-Till 586-043M 12/15/2004
20
40’ Wing Fold Strap & Fold Bracket Assembly
Bolt the Cylinder Mount/Hinges (1) to
the inside wing frame, Figure 7, with 5/8 x 4
x 6½ u-bolts (2) and 3/4 x 2 hex bolts (3),
using lock washers and hex nuts. Insert the
front and back curved fold links (4) and (5)
into the fold brackets (1) as shown and secure
with 1 x 7 Gr. 8 special thread hex bolts (6)
and nylon lock nuts, do not torque. Bolt the
fold straps (7) to the wing frame assembly
with 1 x 3 hex bolts (8) and 1 x 3½ hex bolts
(9) using hex nuts and lock washers. Attach
the two Wing Flex Limiters (10) to the inside
wing frame with 5/8 x 2 Gr. 8 hex bolts (11)
securing with lock washers and hex nuts.
Figure 7
3/21/2005