Great Plains 4000TM Assembly Manual - Manual (Page 8)

586-537Q-ENG 12/03/2013
4 3500-4000TM Great Plains Manufacturing, Inc.
Introduction
The Turbo Max has been designed with care and built by
skilled workers using quality materials. Proper setup,
maintenance, and safe operating practices will help the
customer get years of satisfactory use from the machine.
Description of Unit
The 3500-4000TM Turbo Max is a three section “vertical”
tillage tool. Working width ranges from 35 to 40 feet. The
implement is designed to cut and size residue, till soil for
faster seedbed warming, break up soil crust on hard dried
fields while eliminating compaction layers. The front and
rear gangs may be adjusted from 0-6 degree angle,
depending on the aggressiveness desired. Various finish-
ing attachments are also available to further smooth,
redistribute residue, kill weeds, and break clods.
Models Covered
Document Family
Tools Required
• Basic Hand Tools
• Torque Wrench
• Fork Truck, Overhead Hoist or Loader
Pre-assembly Checklist
❑ Before assembling, read and understand “Important
Safety Information” in front part of this manual.
❑ Have at least two people on hand while assembling.
❑ Make sure area is level and free of obstructions (pref-
erably an open concrete area).
❑ Have all major components
❑ Have all fasteners and pins shipped with machine.
3500TM 35’ (7.5in) spacing
4000TM 40’ (7.5in) spacing
586-537Q Pre-Delivery Manual
586-537M Operator Manual
586-537P Parts Manual
586-537Q-ENG Assembly Manual (this document)
Figure 1
3500 Turbo Max
43102