Musica single / multi-zone operation modes – ClearOne MU5066 User Manual
Page 28
MUSICA SINGLE / MULTI-ZONE OPERATION MODES
All specifications subject to change without notification. All rights reserved. Copyright©2005 NetStreams
Main +1 512.977.9393 / fax +1 512.977.9398 / 3600 W. Parmer Lane Suite 100, Austin, TX 78727 /
www.netstreams.com
NS-0505-7121
25
The Musica MU5066 keypads feature two operations modes which can be selected from the menu on the
MU5066 keypad: Single-Zone and Multi-Zone modes.
The Multi-Zone mode is the default mode
and allows for the keypad to access global sources connected to the Audio
Distribution Center.
The Single-Zone operations mode
allows for the keypad to be used in a room without an Audio Distribution Center. To do
this, you will need the NetStreams PL228 plug-in power supply (sold separately) to power the keypad. The single-zone
mode will allow playback of FM tuner in that zone (when Digital FM Tuner card is inserted) and a local source (when Audio
Port is connected to the keypad).
**If upon connecting the keypad and powering it up the keypad can not find the Audio Distribution Center, the
keypad will default to single zone mode.
**If the “No Connection Check the Cable” message is displayed, disconnect power, hold the SRCE button down
and then turn power on. This will cause the keypad to enter operation mode menu.
To Change the Multi-Zone Mode, do the following:
1. On the MU5066 keypad, press the MENU key and then press the number keys “1, 3, 5, and 7”.
2. The Multi-Zone Mode Menu will appear. Use the arrow up / down key to select either “Multi-Zone Mode” or “Single
Zone Mode”.
Multi-Zone Mode / Multi-Zone (default)
Single-Zone Mode
3. Press
the
MENU
key again.
4. The MU5066 keypad will restart and reset itself to the mode you have chosen. The mode you have selected will
appear on the before the NetStreams splash screen appears on the LCD screen upon restart.
NOTE:
The Single-Zone mode will only allow the keypad to select from up to two sources – the local source connected to
the Audio Port and the local FM Tuner (Digital FM Tuner Card required).
NOTE:
The Single-Zone mode can not transmit IR codes, since there is no communication with the Audio Distribution
Center.