ClearOne MU5066 - Manual (Page 12)

MUSICA KEYPAD AMPLIFER OVERVIEW
All specifications subject to change without notification. All rights reserved. Copyright©2007 NetStreams
Main +1 512.977.9393 / fax +1 512.977.9398 / 3600 W. Parmer Lane Suite 100, Austin, TX 78727 / www.netstreams.com
NS-0505-7121
9
•
ROOM Accesses other rooms in the system to turn them ON or OFF and adjust sources.
• EXT (External Audio) Controls direction of the audio signal (input/output) of an external component such as a local
room audio source when the room is expanded utilizing the Audio Port (EIM). Also allows for the choice of a fixed or
variable output, and tuner controls, spacing, sensitivity, as well as deemphasize of the FM tuner card (DFMT).
Source Functions
The wall-mounted keypad/amplifiers come with a
group of buttons designated as a direct user
interface to the audio sources. It functions as a
control for the 4 different home-wide audio sources.
Once the buttons have been programmed, they control
the audio source currently selected from that room.
When the settings for each source have been
learned at any wall-mounted keypad, they are then
stored in non-volatile memory in the ADC.
All settings are then available across all rooms
without any additional programming
.
Room Control and System Status
One room can monitor the state of all other rooms
and turn the power of other rooms on or off
remotely. The at-a glance display allows easy
operation of all rooms from any location in the
home. The menu functions of any keypad can be
locked out by pressing the sequence 1,2,3,4 at any
keypad to prevent unwanted changes being made to
the settings for that keypad. To reactivate the menu
function, from the remote control or keypad, press
5,6,7,8.
Plug & Play Expansion
Using the optional Audio Port, users can easily add external sound sources and
output devices to expand the system at the local room level. When the Audio Port is
connected, the keypad detects it automatically and displays it in the menu view as a
fifth source for that room only. The user can now select it using the source button.
The sources can now be browsed and selected in the following sequence as an
example: TAPE, CD, AUX, TUNER, and EXT.
When an external audio system is connected to the audio output, for maximum
flexibility the user can select the integrated digitally controlled amplifier, an external
amplifier, or both via the amp selection menu of the keypad.