Connecting through the web interface, Xap net web page, Web access – ClearOne XAP Net User Manual
Page 10
XAP Net — Web Access
17
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
XAP Net — Web Access
16
The XAP Net has a built-in web server that provides a remote access interface to your XAP Net
system. Not all programming and metering functions are available.To use the web interface from
outside your network, your firewall must be properly configured. If you are accessing XAP Net
from within the network, you may use the network name.The web interface uses port 80.
Connecting through the web interface
Note: If you do not have Java Virtual Machine 1.4 installed on your computer, you will be
prompted to download and install it. You will need to do this before you can use the web interface.
You can download JVM 1.4 from the Sun Microsystems web site at www.sun.com.
To connect to XAP Net through the web interface
1. Open a web browser and enter the
IP address
or
network name
of the XAP Net in the
address bar.
2. Enter your
user name
and
password
.
3. Connected units are shown in the left channel navigation. Use the unit links to access the
unit pages.
4. Use the buttons in the top navigation to access help, log out, or return to the home page.
XAP Net web page
The XAP Net web page displays site information and XAP Net unit information including
firmware version, IP address, and time server. From this page, you can run Safety Mute.
To enable/disable Safety Mute
•
Click
Safety Mute On
to mute and
Safety Mute Off
to unmute.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Web Access
Figure 30. XAP Net web page
XAP 800 and PSR1212 web pages
From the XAP 800 and PSR1212 web pages, you can mute or change the input and output
gain, view Post Gain and Output meter levels, and run presets and macros.
To run a preset
•
Select the desired preset from the list and click
Run
.
To run a macro
•
Select the desired macro from the list and click
Run
.
To mute and input or output
•
Select the
Mute
checkbox that corresponds with the input or output you want to mute.
To change a gain setting
•
Type the new level in the
Gain
box. This will change the fine gain setting on the unit.
To view post-gain meter
•
To view the post-gain meter on an input, select the corresponding
Post-Gain Meter
checkbox.
To view output meter
•
To view the meter on an output, select the corresponding
Output Meter
checkbox.
Figure 31. XAP 800 web page