Source input adjustments (in gain), Fm tuner settings, Adjusting the fm tuner sensitivity – ClearOne NetStreams Quartet User Manual
Page 45: Source input adjustments (in gain) -24, Fm tuner settings -24, Adjusting the fm tuner sensitivity -24
Quartet User’s Guide
4-24
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
NOTE
Source Input Adjustments (IN GAIN)
The IN GAIN setting changes the amount of adjustment for source input sensitivity
(+/- 6db).To change the input sensitivity, follow these steps:
1.
Use the down arrow key to highlight IN GAIN.
2.
Press the MENU key to select IN GAIN.
3.
Use the down arrow key to highlight MODIFY and press the MENU key. The
following screen appears:
Figure 4-30
Setting the input adjustment
4.
Press the up or down arrow key to move the sensitivity higher or lower.
5.
When you are done setting the input sensitivity, press the MENU key.
From the IN GAIN menu, you can also select:
NEXT - to move to the next menu item.
PREV - to move to the previous menu item.
FACTORY - returns the name to the factory default.
SET ALL - sets all the sources to this name.
For IR learning, see
Chapter 5.
FM Tuner Settings
Select FM TUNER from the SOURCE menu->FM TUNER selected menu.
Adjusting the FM Tuner Sensitivity
The SENSITIVITY setting defines how much signal the tuner recognizes when it does
a seek. It can be set to low, mid, or high.
To define how much signal you want the turner to recognize when it scans or seeks,
follow these steps:
1.
Use the down arrow key to highlight SENSITIVITY.