ClearOne NetStreams Quartet - Manual (Page 43)

Quartet User’s Guide
4-22
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Using the SOURCE Menus
The SOURCE menu lets you adjust settings for each individual source. Select
SOURCE from the Main menu. Select a source to change settings for an individual
source as shown in the following figure.
Figure 4-26 SOURCE menu
After you select a source, the following screen appears:
Figure 4-27
The menu items available from the SOURCE menu include:
NAME Allows you to name a specific room.
IN GAIN Changes the amount of adjustment for source input sensitivity.
IR FREQ Sets the IR frequency to 38 or 56 KHz. Discussed in Chapter 5.
IR LEARN Learns source’s remote control IR commands to the Quartet
remote. Discussed in Chapter 5.
2’S REPEAT Is the delay time between the first IR command sent and all
consecutive IR commands sent from the 2nd function on each
button (Button Hold). Discussed in Chapter 5.
MACRO TIME Adjusts the delay time between each IR command sent in a
macro and in an RnR macro. Discussed in Chapter 5.
KEY MACRO Selects up to two macros based on a combination of up to four
remote keys. Discussed in Chapter 5.