Speaker impedance adjustments, Speaker impedance adjustments -10 – ClearOne NetStreams Quartet User Manual
Page 31
Quartet User’s Guide
4-10
All specifications subject to change without notification. All rights reserved. Copyright © 2007 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 7872
Figure 4-12
Setting the volume
3.
Use the down arrow key to highlight MODIFY and press the MENU key.
4.
Use the up or down arrow to select the volume.
5.
Press the MENU key when you are done selecting the volume for the room.
From the VOLUME menu, you can also select:
NEXT - to move to the previous menu item.
PREV - to move to the next menu item.
FACTORY - to return this setting back to the factory settings.
SET ALL - sets all the rooms to this volume.
Speaker Impedance Adjustments
The SPEAKER setting adjusts the Quartet’s amplifier to match the impedance of the
speakers in each room. You can select from 4 ohm, 6 ohm or 8 ohm. In addition, it lets
you choose Quartet’s internal amplifier or an external amplifier (if you have an
optional audio port connected).
To change the speaker settings, follow these steps:
1.
Use the down arrow key to highlight SPEAKER.
2.
Press the MENU key to select SPEAKER.
3.
Use the down arrow key to highlight MODIFY and press the MENU key. The
following screen appears:
Figure 4-13
Adjusting the speaker settings