SARGENT 8200 Mortise Lock with BHW Trim - Manual

U.S. Patent Numbers: 5,678,870; 7,188,870 & 7,452,012
How To Change Hand of Lock
How to Change Function of Lock:
Green catch screw must be located as designated on lock case to create desired function.
3 locations: One for 05, 37 & 38 functions
One for 04, 06, 13, 17 & 31 functions
And one for 36 function
Note: When moving green catch screw to 04, 06, 13, 17 & 31 functions, hub
position must be at 45° as shown on lockcase.
* Note: 17 function requires both levers to be rigid. Rotate red locking piece 90°,
so red surface of slide faces back of lockbody.
*See How to Change Hand of Lock, page 6.
Items needed to create each of the following functions:
#41 Cylinder is standard for both single & double cylinder functions for 1-3/4" thick door
NOTE: Trim-one-side functions always require an inside trim assembly which can be
used on the inside or outside of the door (to order Trim one-side kit
(for all trim except PT or FE) order part # 82-4611.
I nstructions for Installing SARGENT
8200 Mortise Lock With BHW Trim
SARGENT 8200 Series Mortise Lock Function List 8200 Mortise Locks
Multi-function Lockbody Options
04, 05, 06, 13, 17, 31, 36, 37, 38
Note: Beveled surface of latch must face
strike. The deadlatch is self adjusting.
To change hand of latch:
Note: Red surface of locking piece must face
secure side of door.
To rotate locking piece:
1. Position lockbody with red surface of locking
piece visible.
2. Insert blade type screwdriver into locking
piece slot to rotate locking piece.
3. Push locking piece toward back of lock body
and rotate 180° until RED surface shows on
opposite side.
Red color indicates locked
side of door or hold back
side (91 and 92 Functions)
Locking
piece
slot
Lock front
Latch
1. Insert screwdriver
blade into the
spade shaped slot
2. Rotate screwdriver 90º to push latch out
until back of latch clears lock front. Then
rotate latch 180º.
Latch will then re-enter lockbody.
(Note: Latch can not be unscrewed)
NOTE: 05 FUNCTION HAS A THUMB TURN ON THE INSIDE FACE OF
DOOR AND 55 FUNCTION HAS TOGGLE ON LOCK FRONT
A8146B 1 6 5
Note: Shaded Levers are Rigid at all times
Function Outside
Lever
Inside
Lever
Trim One
Side Kit
Outside
Cylinder
Inside
Cylinder
Thumb
Turn
04 X X X
05 X X X X***
06 X X X
13 X X
17 X X X X
31 X X X
36 X X X
37 X X X
38 X X X X
Note: 04, 06, 13, 17 and 31 Functions require:
(a) Green catch screw to be removed
(b) Rotate hub to 45º position
(c) Rotate locking piece for required hand
(d) Red surface faces locked side of door
(e) Rotate hub to the original 45º
position as shown on lockcase
(f) Green catch screw is then reinstalled
Copyright © 2012, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.
Figure A
To view helpful video installation tips, scan the Microsoft
®
Tags with
your mobile phone. Download the free mobile app at http://gettag.mobi.
Scan to see a
video of this
installation step.
Scan to see
a video
of this
installation
step.