How to change hand of lock, Ih j – SARGENT 7800 Knob Locks User Manual
Page 3
3
I
H
J
(9) Screw rose (J) firmly onto
adapter & plate assembly (F)
(or attach escutcheon)
(10) Attach inside lever and
secure with 1/8" Allen
wrench. Verify Lock is
operating correctly prior
to closing door
(13) Attach outside front (H)
with two #8-32 x 1/4"
flat head screws (I)
(11) Assemble thumbturn/
emergency release according
to instructions on bag
Note: To check for proper lock operation by function
number (ex: 8205 = 05 function) - see 7800/8200 catalog
(www.sargentlock.com).
(12) Check for proper operation
How To Change Hand of Lock
INSIDE
INSIDE
OUTSIDE
OUTSIDE
LEFT HAND
LEFT HAND
REVERSE
BEVEL
RIGHT HAND
RIGHT HAND
REVERSE
BEVEL
DOOR HANDS DETERMINED FROM OUTSIDE
DOOR HANDING
Note: Beveled surface of latch must face strike.
The deadlatch is self adjusting. To change hand of latch:
Note: Red surface of locking piece must face secure side
of door.
To rotate locking piece:
1. Position lockbody with red surface of locking piece visible
2. Insert blade type screwdriver into locking piece slot to
rotate locking piece
3. Push locking piece toward back of lock body and rotate
180° until RED surface shows on opposite side
Red color indicates locked
side of door or hold back
side (91 and 92 Functions)
Locking
piece
slot
Lock front
Latch
1. Insert screwdriver
blade into the
spade shaped slot
2. Rotate screwdriver 90º to push latch out until back
of latch clears lock front. Then rotate latch 180º.
Latch will then re-enter lockbody.
(Note: Latch can not be unscrewed)
Note: 04, 06, 13, 17 and 31 Functions require:
(a) Green catch screw to be removed
(b) Rotate hub to 45 degree position
(c) Rotate locking piece for required hand
(d) Red surface faces locked side of door
(e) Rotate hub to the original 45 degree
position as shown on lockcase
(f) Green catch screw is then reinstalled
Copyright © 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
A7034G