SARGENT 8500 Narrow Design Rim Exit Device User Manual

Page 2

MARK VERTICAL AND HORIZONTAL

REFERENCE LINES ON DOOR

41" FROM FINISHED

FLOOR, OR AS

SPECIFIED

TAPE TEMPLATE ON INSIDE OF DOOR ALONG
REFERENCE LINES. SPOT AND DRILL HOLES.
MORTISE HOLES FOR OUTSIDE TRIM, IF
REQUIRED.

PREPARE DOOR

41" FROM FINISHED

FLOOR, OR AS

SPECIFIED

TAPE
SUPPLIED

HORIZONTAL
REFERENCE LINE (C OF
STRIKE AND LATCHBOLT

HOLE LOCATION
(EXAMPLE)

VERTICAL REFERENCE
LINE (C OF CHASSIS)

8500 / 12-8500

04, 44, 10, 40 FUNCTIONS

TRIM CYLINDER TAIL FOR 1/4" TO
1/2" PROJECTION THRU DOOR,
04 / 44 FUNCTIONS.

INSTALL CYLINDER ADAPTER ON
CYLINDER BEFORE INSTALLING
CYLINDER IN DOOR.

10/40 FUNCTIONS: SAME EXCEPT
NO CYLINDER.

8500 / 12-8500

13, 15, 43, 73, 74 Functions

USING VERTICAL AND HORIZONTAL
REFERENCE LINES, ATTACH TRIM,
OUTSIDE DOOR SURFACE.

THRU-BOLT CHASSIS TO TRIM,
INSIDE DOOR SURFACE, TOP AND
BOTTOM, AS SHOWN.

8504 SHOWN

Reproduction in whole or in part without the express written

permission of Sargent Manufacturing Company is prohibited.

A6699N

13/16" FROM

SURFACE OF STRIKE

(REFERENCE STRIKE

TEMPLATE)

CYLINDER
ADAPTER

#34 RIM
CYLINDER

8513 SHOWN

NOTE:
CHASSIS SCREWS REQUIRED,
12-FIRE RATED DEVICES, AS SHOWN.
(2) #10-24 x 1 1/4" PH #8 OV. HD. MACHINE SCREWS