SARGENT 10 Line Cylindrical Lock User Manual

Page 4

Install 10U94/10U94-2

Remove 10G13

A7133J

• Remove inside (non-rigid) lever with standard

push pin

• Insert long push pin into inside lockbody tube

and push to release spring loaded lever catch

plug assembly for the outside lever
• Remove the outside lever with lever catch plug

assembly attached

• Power Required: 24Volt DC, .25 amps,

wiring information provided

• Wires must be protected from

abrasion

• Important- See correct door template

4409 provided or on the

Function Description:
10G70 Fail Secure

Power OFF unlocks outside lever

Power ON locks outside lever

Key retracts latch at all times
10G71 Fail Secure

Power ON unlocks outside lever

Power OFF locks outside lever

Key retracts latch at all times

2-FRONT

Screw
1/4 x 20

Cup
washer

Screws (2) #6 x 3/4"

Scalp to be removed
with flat bladed screwdriver

2 holes to align with
2 tabs on rose

Rose

Install 10U93

Install 10G70 & 10G71

Screw
1/4 x 20

Cup
washer

Backset

1-1/8"

1/8" x 3/16" deep

Hole
5/16"
dia.

Screws (2) #6 x 3/4"

Scalp to be removed
with flat bladed screwdriver

Screws (2) 10-32 x 1-1/4"

Screws (2)
#8-32 x 3/4"

Tab

2 holes to align with
2 tabs on rose

Rose