Tweco Eliminator Spool Gun - Manual (Page 27)

safety and operating instructions
12-23 89200011 Contact Tip Identification and Parts List
12.01 CONTACT TIP REPLACEMENT
NOTE
Replace contact tip if hole is enlarged or deformed.
1. Select the correct contact tip according to the wire used.
2. Remove the nozzle from the gun to reveal the contact tip.
3. Remove the contact tip. Replace contact tip and tighten plier tight.
12.02 NOZZLES
AIR COOLED ELIMINATOR NOZZLES
Nozzle Style
Bore Diameter
(in/mm)
Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship
EL24I SERIES
Slip-On (A)
3/8’ (9,5mm) EL24I-37 1260-1606 Tapered 1/8” - 5/32” (3,2mm - 3,97mm) Tip Recess
1/2” (12,7mm) EL24I-50 1260-1607 Tapered 1/8” - 5/32” (3,2mm - 3,97mm) Tip Recess
5/8” (15,9mm) EL24I-62 1260-1608 Tapered 1/8”-5/32” (3,2mm - 3,97mm) Tip Recess
5/8” (15,9mm) EL24I-62F 1260-1618 Tapered Flush To 1/16” (1,6mm) Tip Recess
5/8” (15,9mm) EL24I-62R 1260-1677 Tapered 3/8” (9,5mm) Tip Recess
5/8” (15,9mm) EL24I-62H 1260-1631
Tapered
Heavy-Duty
1/8” - 5/32” (3,2mm - 3,97mm) Tip Recess
5/8” (15,9mm) EL24I-62HF 1260-1641
Tapered
Heavy-Duty
Flush To 1/16” (1,6mm) Tip Recess
3/4” (19,5mm) EL24I-75 1260-1609 Tapered 1/8” - 5/32” (3,2mm - 3,97mm) Tip Recess
3/4” (19,5mm) EL24I-75H 1260-1632
Tapered
Heavy-Duty
1/8” - 5/32” (3,2mm - 3,97mm) Tip Recess
EL24CT SERIES
Thread-On (B)
3/8’ (9,5mm) EL24CT-37 1260-1650 Standard 1/8” - 5/32” (3,2mm - 3,97mm) Tip Recess
1/2” (12,7mm) EL24CT-50 1260-1651 Standard 1/8” - 5/32” (3,2mm - 3,97mm) Tip Recess
1/2” (12,7mm) EL24CT-50F 1260-1666 Standard Flush To 1/16” (1,6mm) Tip Recess
1/2” (12,7mm) EL24CT-50P 1260-1701 Standard 5/32” (3,97mm) Tip Protruding
5/8” (15,9mm) EL24CT-62 1260-1652 Standard 1/8” - 5/32” (3,2mm - 3,97mm) Tip Recess
5/8” (15,9mm) EL24CT-62F 1260-1667 Standard Flush To 1/16” (1,6mm) Tip Recess
5/8” (15,9mm) EL24CT-62P 1260-1702 Standard 5/32” (3,97mm) Tip Protruding
5/8” (15,9mm) EL24CT-62R 1260-1682 Standard 3/8” (9,5mm) Tip Recess
5/8” (15,9mm) EL24CT-62H 1260-1657
Standard
Heavy-Duty
1/8” - 5/32” (3,2mm - 3,97mm) Tip Recess
3/4” (19,5mm) EL24CT-75 1260-1653 Standard 1/8” - 5/32” (3,2mm - 3,97mm) Tip Recess
3/4” (19,5mm) EL24CT-75H 1260-1658
Standard
Heavy-Duty
1/8” - 5/32” (3,2mm - 3,97mm) Tip Recess
Note: Self Insulated Nozzles
(A) - Use with Part No. EL54 Series Gas Diffusers
(B) - Use with Part No. EL54CT Series Gas Diffusers