Tweco 200 Ultra-Cut(March 2013) - Manual (Page 79)

Manual No. 0-5133 4-7 OPERATION
ULTRA-CUT 200
Art # A -09162
Customize Recent Cut.
Highlight the process closest
to what you want to use then
press CUSTOM CUTS button.
Or
Select NEW CUT then
MATERIAL & THICKNESS.
HOME
Shows
List of
consumables
to use.
CUSTOM PROCESS SETUP
Select value to
change using UP/DN
arrows. Change value
with +/- buttons.
If the custom process requires
different setting, speed, arc
voltage, etc., edit it here.
Editing the THC / CNC
SETTING is for reference
only, does not change the
actual THC or CNC setting.
That must be done on the
THC or CNC.
CUSTOM THC/CNC SETTINGS
SELECT MATERIAL/THICKNESS
SELECT CUT
TORCH CONSUMABLES LIST
CUT MONITOR
Going to the Cut Monitor loads the new custom process with its name/number
in red. Following purging of the new process you are ready to cut. Your
custom process will appear in the recent cuts menu in red.