Tweco 42 CutMaster Operating Manual - Manual (Page 8)

GENERAL INFORMATION 1-8 Manual 0-5141 Manual 0-5141 1-9 GENERAL INFORMATION
CUTMASTER 42 CUTMASTER 42
Manufacturer: Victor Technologies LTD (Formerly Thermadyne Corporation)
Address: Europa Building
Chorley N Industrial Park
Chorley, Lancashire,
England PR6 7BX
Type of Equipment: Plasma Cutter
Model /Number: CUTMASTER 42
Serial Number: Serial numbers are unique with each individual piece of equipment and details description, parts
used to manufacture a unit and date of manufacture.
Market Release Date: 10-10-2013
Classification: The equipment described in this manual is Class A and intended for industrial use.
!
WARNING
This Class A equipment is not intended for use in residential locations where the electrical power is provided
by the public low-voltage supply system. There may be potential difficulties in ensuring electromagnetic
compatibility in those locations, due to conducted as well as radiated disturbances.
The product is designed and manufactured to a number of standards and technical requirements. Among them are:
Harmonized Standard of “EMC Directive”
EN 60974-10:2007 Arc Welding Equipment - Part 10: Electromagnetic compatibility (EMC) requirements
Harmonized Standard of “Low Voltage Directive”
EN 60974-1:2005 Arc Welding Equipment - Part 1: Welding power sources. (Superseded by Standard EN 60974-1:2012)
Extensive product design verification is conducted at the manufacturing facility as part of the routine design and manufacturing
process. This is to ensure the product is safe, when used according to instructions in this manual and related industry stan-
dards, and performs as specified. Rigorous testing is incorporated into the manufacturing process to ensure the manufactured
product meets or exceeds all design specifications.
Victor Technologies International Inc. has been manufacturing products for more than 30 years, and will continue to achieve
excellence in our area of manufacture.
Manufacturer’s Authorized Representative
Steve Ward V.P. Europe and General Manager
Address: Victor Technologies LTD (Formerly Thermadyne Corporation)
Europa Building
Chorley N Industrial Park
Chorley, Lancashire,
England PR6 7BX
Date: 10-10-2013
Steve Ward
Full Name
V.P. Europe and General Manager
(Position)
(Signature)
Declaration of Conformity
Application of Council Directive(s): The equipment described in this manual conforms to all applicable
aspects and regulations of the ‘Low Voltage Directive’ (European Council Directive 2006/95/EC) and to
the National legislation for the enforcement of this Directive.
The equipment described in this manual conforms to all applicable aspects and regulations of the “EMC
Directive” (European Council Directive 2004/108/EC) and to the National legislation for the enforcement
of this Directive.
1.07 Statement of Warranty
LIMITED WARRANTY: Subject to the terms and conditions established below, Victor Technologies warrants to the original retail
purchaser that new Thermal Dynamics CUTMASTER® plasma cutting systems sold after the effective date of this warranty are
free of defects in material and workmanship. Should any failure to conform to this warranty appear within the applicable period
stated below, Victor Technologies shall, upon notification thereof and substantiation that the product has been stored operated
and maintained in accordance with Victor Technologies’s specifications, instructions, recommendations and recognized industry
practice, correct such defects by suitable repair or replacement.
This warranty is exclusive and in lieu of any warranty of merchantability or fitness for a particular purpose.
Victor Technologies will repair or replace, at its discretion, any warranted parts or components that fail due to defects in
material or workmanship within the time periods set out below. Victor Technologies must be notified within 30 days of any
failure, at which time Victor Technologies will provide instructions on the warranty procedures to be implemented.
Victor Technologies will honor warranty claims submitted within the warranty periods listed below. All warranty periods
begin on the date of sale of the product to the original retail customer or 1 year after sale to an authorized Victor Technologies
Distributor.
LIMITED WARRANTY PERIOD
Product
Power Supply Components
(Parts and Labor)
Torch and Leads
(Parts and Labor)
CUTMASTER 42 4 Year 1 Year
This warranty does not apply to:
1. Consumable Parts, such as tips, electrodes, shield cups, o - rings, starter cartridges, gas distributors, fuses, filters.
2. Equipment that has been modified by an unauthorized party, improperly installed, improperly operated or misused based
upon industry standards.
In the event of a claim under this warranty, the remedies shall be, at the discretion of Victor Technologies:
1. Repair of the defective product.
2. Replacement of the defective product.
3. Reimbursement of reasonable costs of repair when authorized in advance by Victor Technologies.
4. Payment of credit up to the purchase price less reasonable depreciation based on actual use.
These remedies may be authorized by Victor Technologies and are FOB West Lebanon, NH or an authorized Victor Technologies
service station. Product returned for service is at the owner’s expense and no reimbursement of travel or transportation is
authorized.
LIMITATION OF LIABILITY: Victor Technologies shall not under any circumstances be liable for special or consequential
damages such as, but not limited to, damage or loss of purchased or replacement goods or claims of customer of distributors
(hereinafter “Purchaser”) for service interruption. The remedies of the Purchaser set forth herein are exclusive and the
liability of Victor Technologies with respect to any contract, or anything done in connection therewith such as the performance
or breach thereof, or from the manufacture, sale, delivery, resale, or use of the goods covered by or furnished by Victor
Technologies whether arising out of contract, negligence, strict tort, or under any warranty, or otherwise, shall not, except as
expressly provided herein, exceed the price of the goods upon which liability is based.
This warranty becomes invalid if replacement parts or accessories are used which may impair the safety or performance
of any Victor Technologies product.
This warranty is invalid if the Thermal Dynamics product is sold by non - authorized persons.
Effective October 15, 2010