Tweco CutMaster 12mm-20mm-25mm - Manual (Page 61)

CUTMASTER 12mm, 20mm, 25mm
Manual 0-5117 6-1 PARTS LIST
SECTION 6:
PARTS LISTS
6.01 Introduction
A. Parts List Breakdown
The parts list provide a breakdown of all replaceable components. The parts lists are arranged as follows:
Section "6.03 Power Supply Replacement"
Section "6.04 Replacement Power Supply Parts"
Section "6.05 Options and Accessories"
Section "6.06 Replacement Parts for Hand Torch"
Section "6.07 Replacement Parts - for Machine Torches with Unshielded Leads"
Section "6.08 Replacement Shielded Machine Torch Leads Assemblies"
Section "6.09 Torch Consumable Parts (SL60)"
Section "6.10 Torch Consumable Parts (SL100)"
NOTE
Parts listed without item numbers are not shown, but may be ordered by the catalog number shown.
B. Returns
If a product must be returned for service, contact your distributor. Materials returned without proper autho-
rization will not be accepted.
6.02 Ordering Information
Order replacement parts by catalog number and complete description of the part or assembly, as listed in the
parts list for each type item. Also include the model and serial number of the power supply. Address all inqui-
ries to your authorized distributor.
6.03 Power Supply Replacement
The following items are included with the replacement power supply: work cable & clamp, input power cable,
gas pressure regulator / filter, and operating manual.
Qty Description Catalog #
1 CutMaster 12mm CE Power Supply
with 380/400 VAC 3 phase, 50 Hz with input power cable 3-5130-4
1 CutMaster 20mm CE Power Supply
with 380/400 VAC 3 phase, 50 Hz with input power cable 3-1130-4
1 CutMaster 25mm 400V CE Power Supply
with 380/400 VAC, 3 Phase, 50 Hz, with input power cable 3-1330-4
1 CutMaster 25 400V Non CE Power Supply
with 400/415VAC, 3 Phase, 50 Hz, with input power cable 3-1130-3