Rtp push – Teradek Cube Reference Guide User Manual

Page 31

Version 2

Page | 31

2.1.

2.2. RTSP Announce streaming allows Cube to start and stop broadcasts to a remote streaming

server (such as Wowza). The RTSP announce license is provided by request, free of charge.

2.3.

Configuration: Enter the host name or IP address of your server in the „Host Name‟ field. Enter

the host port configured on your server in the „Host Port‟ field (default is 1935). In the „File‟ field,

enter the name of your application and desired stream name. The file will vary based on your

chosen server. For example, if streaming to a Wowza server with an application „live‟ and a

desired stream name „stream1,‟ „live/stream1‟ should be entered in the „File‟ field.

2.4. Using RTSP announce: Once your stream has been configured, start and stop broadcasting to

your server by clicking the „Start‟/‟Stop‟ button on the Stream Settings page, or press and

release the „Go Live!‟ button. The „ENC‟ LED blinks rapidly when starting or stopping a

broadcast.

2.5. User name and password are configurable for streaming servers that require authentication.

3. RTP push

3.1.

3.2.

RTP Push streaming allows you to direct video to a server or client and generates an „.sdp‟ file

containing the stream description. SDP files can be stored on a streaming server, or opened by

video players like VLC. The RTP Push license is provided by request, free of charge.

3.3.

Configuration: To configure RTP push, select „Enabled,‟ then specify your desired IP address

and port. Click „Apply‟ to save your configuration and generate the SDP file.