Decoder, Changing output format, Pairing – Teradek Cube Reference Guide User Manual

Page 14

Version 2

Page | 14

Decoder

If you purchased your decoder as a „Cubelet‟ (paired with an encoder) there is no additional configuration

required beyond ensuring that the two devices are on the same network (see

, page 7). Find

instructions

for setting your video output resolution and switching between

streams below.

1. Changing output format

1.1.

Open your Cube decoder‟s web UI and log into the device.

1.2. Navigate to

„Video Setup‟ -> „Device Settings.‟

1.3.

Select your desired resolution under „Video Output Format.‟

1.4. Click

„Apply.‟

2. Pairing