Teradek Cube Reference Guide - Manual (Page 30)

Version 2 Dec „11 © Teradek, LLC 2011. All rights reserved.
Page | 30
Advanced and/or activatable applications
The following options offer additional functionality over Cube‟s default feature set. Licenses for some
features are available by request at no charge (RTMP, RTSP announce, RTP push). Licenses for the
other features can be purchased through Teradek or your local reseller. For instructions on installing
licenses, please refer to the Licenses section, page 26.
1. RTMP
1.1.
1.2. RTMP streaming allows you to stream to your own custom server or CDN. Configuration for
RTMP requires a destination server URL and a stream name, and allows Cube to push video
content directly to the destination. The RTMP license is provided by request, free of charge.
1.3. Configuration:
1.3.1. Enter the server URL. Depending on where you are streaming to (local server or CDN), this
will look something like rtmp://server.address:1935/live. This will vary by platform, so check
with them to get the proper address. Often the server URL is found with FMLE instructions
or buried in a downloadable XML file.
1.3.2. Enter the stream name. This varies by platform, but should be found somewhere near the
server URL.
1.3.3. Select enabled or disabled for auto-start broadcast. If enabled, Cube will attempt to start a
broadcast whenever it starts up.
1.3.4. Click „Apply.‟ You can start/stop the stream by clicking the buttons on the Stream Settings
page or by holding the 'Go Live!' button on Cube for ~1 second.
2. RTSP announce