tekmar 546 Thermostat User Manuals User Manual
Page 9
9 of 12
© 2007
U 546 - 08/07
Location
Scene
Temperature
Master Bedroom
1
Schedule
4
Schedule
Guest Bedroom
1
UnOccupied
4
Schedule
To select a scene:
1. Use the Menu button to select the Scene menu.
2. Use the Item button to select the Select item.
3. Use the Up or Down button to select the desired
scene.
•
• Default Scene: The default scene is Permanent 1. In a
typical installation, the thermostat follows the schedule.
•
• Factory set scene: When you select a factory set scene
(2, 3, and 6), all of the thermostats using the scene
feature use the temperature specified by the scene.
•
• Custom scenes: When you select a custom scene,
your installer will have preset each thermostat using the
scene feature to either follow its regular schedule, or go
to the set wake, occupied, unoccupied, sleep or away
temperature.
Example:
A house is normally in scene Permanent 1. There is a
master bedroom that operates on a schedule and there is
a guest bedroom that is normally set to Unoccupied. When
a guest arrives, the scene is to change to Permanent 4.
Scene 4 changes the guest room to operate on the setback
schedule.
Extended Absences
If you are going away for an extended period of time, the
AWAYHOLD feature allows you to override the regular
schedule of the thermostat for a set number of days.
During the Away Hold, the thermostat operates at the Away
temperature set by your installer.
After the Away Hold has expired, the thermostat returns to
its normal operation.
If you have multiple tekmar thermostats installed, you need
only to do the following on one thermostat.
To set the number of days you will be away:
1. Use the Menu button to select the Scene menu.
2. Use the Item button to select Away Hold.
3. Use the Up or Down button to set the number of days
that you will be away.
To start the Away Hold:
1. Use the Menu button to select the Scene menu.
2. Use the Item button to select the SELECT item.
3. Use the Up or Down button to select Scene 2
Permanent Away.
Viewing the Recorded High & Low Temperatures
Use the Monitor Menu to view the high and low temperatures
sensed by your thermostat.
To view the temperatures:
1. Use the Menu button to select the Misc menu.
2. Use the Item button to view the temperatures.
3. Pressing the Up and Down buttons at the same time
while viewing the temperature resets the item.
Outdoor High
Highest recorded outdoor temperature.
Outdoor Low
Lowest recorded outdoor temperature.
Room High
Highest recorded indoor temperature.
Room Low
Lowest recorded room temperature