tekmar 546 Thermostat User Manuals User Manual

Page 7

7 of 12

U 546 - 08/07

Resetting the Filter Timer

Viewing the Current Time

Setting the Time

The thermostat keeps a record of the number of hours the
fan runs. Once the number of hours exceeds the Filter time,
a Filter symbol is displayed in the thermostat display.

To reset the Filter timer after you replace the filter:
1. Use the Menu button to select the Adjust menu.
2. Use the Item button to select CLR FLTR.
3. Use the Up button to select YES.
4. The Filter timer has now reset.

To Clear

the filter

timer

Filter Symbol

To view the current time:
1. Use the Menu button to select the Time menu.

Step 1: Use the Menu button to select the Time menu. The
current time and day displays. If the clock has not been
set, the time will flash.

Step 2: Use the item button to advance through the Time
menu. If your installer has selected Daylight Savings Time,
the date is displayed. If the date has not been set, it will
flash. If your installer has not selected Daylight Savings
Time, the date will not be displayed.

Step 3: Use the Item button to advance to the next item.
The minutes begins to flash. Use the Up or Down button
to set the minutes.

Step 4: Use the Item button to advance to the next item.
The hours begins to flash. Use the Up or Down button to
set the hour.