tekmar 033 4 Timer User Manual
Page 3
3 of 12
© 2007
D 033 - 10/07
Display
Item Field
Displays an abbreviated
name of the selected item
Number Field
Displays the current value
of the selected item
Status Field
Displays the current status
of the timer operation
Menu Field
Displays the
current menu
Symbols
SCHEDULE MASTER
A schedule is in use on this timer.
tN4 COMMUNICATION
Communication is present.
LOCK
The Access Levels are locked. A menu
option is visible but not adjustable.
WARNING
An error is present.
SCHEDULED EVENT
Displays the current scheduled event.
User Interface
Use the User Interface available on the Liquid Crystal
Display (LCD) to setup and monitor the operation of the
Timer. Use the four push buttons below the LCD (Menu,
Item, Up, Down) to select settings. As you enter settings,
record the settings in the Job Record J 033.
Menu
The menus display in the Menu Field at the left of the LCD.
A maximum of six menus are available:
Item
In each menu, a group of items can be selected. The
abbreviated name of the selected item displays in the Item
field of the LCD display.
To view the next available item, press and release the
Item button.
To view the previous item, hold down the Item button and
press and release the Up button.
Adjusting a Setting
To adjust a setting:
1. Use the Menu button to select the appropriate menu.
2. Use the Item button to select a menu item.
3. Use the Up or Down button to adjust the setting.
Default Item
After navigating menus, the display reverts back to the default
item (Time Clock) after 60 seconds of button inactivity.
•
•
Time
Schedule 1
Schedule 2*
•
•
•
Schedule 3*
Schedule 4*
Miscellaneous
•
•
•
To select a menu, press and release the Menu button.
* These items are only available if the switch is set to 4
Schedules and the device is connected to a tekmarNet
®
4
system.
Continue
to next Item
Continue to next Menu
Continue
to next Item