Soleus GPS Tour (SG004) - Manual User Manual
Page 6

GPS Tour
How to set the TIMER:
•
Press S5 while TIMER is blinking. The segment number will start to blink.
•
Press S1/S11 to change the segment number
•
Press S5 to set the HOUR. The hour digit starts to blink.
•
Press S1/S11 to change the digits
•
Press S5 to set the MINUTE. The minute digit starts to blink.
•
Press S1/S11 to change the digits
•
Press S5 to set the SECONDS. The second digit starts to blink.
•
Press S1/S11 to zero the digits.
•
Press S7to exit TIMER setting screen
How to set the SCALE:
•
Press S5while SCALE is blinking. The watch will display SCALE AUTO.
•
Press S1/S11 to change the scale.
•
Press S5/S7 to confirm and exit scale setting screen.
Scale range: AUTO, 50 M, 100 M, 200 M, 400 M, 800 M, 1.6 KM, 3.2 KM, 6.4 KM
3.2) TIME, NIGHT, CONTRAST, & CHIME, can also be set in TIME quick SET mode.
• Press and hold S11 while in Time mode. TIME will start to blink.
• Press S1/S11 to toggle through TIME, NIGHT, CONTRAST and CHIME.
3.3) AUTO LAP, UNITS, USER, and VIEW can also be set in RUN quick SET mode.
•
Press and hold S11 until AUTO LAP blinks.
•
Press S1/S11 to toggle through AUTO LAP, UNIT, USER and VIEW.