Soleus GPS Tour (SG004) - Manual - Manual (Page 15)

GPS Tour
6.3) Using TIMER mode:
RUN mode & TIMER mode has the same chronograph counter. When the chronograph is
started or stopped in RUN mode, the same thing happens in TIMER mode.
Press S7 to go to TIMER mode from Time mode.
• The watch has 6 interval timers segment 1 to segment 6.
• The default values for all segments are 00:00:00.
• Please set the TIMERS first before using this mode.
• When you start the Chronograph in other modes like RUN mode, the set Timer
segments will also start counting down.
• When a segment reaches zero, the next segment will auto start the countdown. The
cycle will loop for 50 loops and auto stop.
• If only 1 segment timer is set and the other segments are set to zero, only that segment
will countdown and loop up to 50 loops.
6.3.1. How to enter TIMER mode.
6.3.2. How to START, STOP, and SAVE in TIMER mode
• Press S1 to start or stop.
• Press and hold S1 to save your data
6.3.3. How to change views in TIMER mode:
•Press S5 to change view.
6.3.4. Ho to view the TIMER segments while the chrono is in reset view:
Press S5 while in GPS GO screen then press S11 to toggle timer segment 1 to 6.