Soleus GPS Tour (SG004) - Manual - Manual (Page 14)

GPS Tour
6.2.1. How to START, take LAP, STOP, and SAVE in CHRONO mode
• Press S1 to start or re-start.
• Press S5 to take LAP. If auto lap function is set, the watch will take lap automatically
based on auto lap setting and there is a beep sound during taking of auto lap.
• Press S1 to stop after completing your run.
• Press and hold S1 or press S11 to save your data.
6.2.2. Press S5 to change the information displayed in Line 3 if you have selected a 3-
ROW display. If you have selected a 2-ROW display, Line 2 information will be
changed as you press S5. Following are the views as your press S5:
3-ROW display: Line 3 information will change as you press S5. Lines 1 will
always display the Lap Time. Line 2 will always display Chrono or Split Time.
2-ROW display: Line 2 information will change as you press S5. The sequence is
the same in 3-row display.
6.2.3. How to view your current data before saving while the chronograph is stopped.
Following are the information as you press S5: