Soleus GPS Tour (SG004) - Manual - Manual (Page 19)

GPS Tour
6.6) Using Altimeter mode:
RUN mode & Altimeter mode has the same chronograph counter. When the chronograph is
started or stopped in RUN mode, the same thing happens in Altimeter mode. The Altimeter
function is GPS based so you need to select GPS when you enter this mode.
Press S7 to go to ALTIMETER mode and press S5, the watch will start to search GPS. Once
the GPS signal is received, the GPS GO screen appears and ready to begin your exercise.
6.6.1. Press S5 to change the views.
6.6.2. How to START, take LAP, STOP, and SAVE:
• Press S1 to start or re-start.
• Press S5 to take LAP. If auto lap function is set, the watch will take lap automatically
based on auto lap setting and there is a beep sound during taking of auto lap.
• Press S1 to stop after completing your run.
• Press and hold S1 or press S11 to save your data.
6.6.3. While the chronograph is stopped, press S5 to view your current data before
saving. Following are the views as you press S5: