Soleus GPS Tour (SG004) - Manual - Manual (Page 13)

GPS Tour
6.1.4. How to view your current data before saving while the chronograph is stopped.
Following are the information as you press S5:
Notes:
o Before going for a run exercise, it is highly recommended that you set your user
profile first so that the calories will be calculated properly. Go to SET mode/USER.
o When the Chronograph is stopped and reset in RUN mode, if no activity for 10
minutes, the GPS will be on Standby mode ( GPS ring icon flashing) and return to
TIME mode.
o While in RUN mode, then the GPS signal suddenly becomes weak lost for any
reason, the Watch will display LOST GPS signal until it receives GPS signal again.
o Maximum of 30 hours of track record / 50 data files/ 300 laps for each data file can
be saved in memory.
6.2) Using Chronograph mode:
RUN mode & CHRONO mode has the same chronograph counter. When the chronograph is
started or stopped in RUN mode, the same thing happens in CHRONO mode.
Press S7 to go to ROUTE mode and press S5, the watch will start to search GPS.