Kenco Engineering KMD Transmitter - Manual (Page 16)

Page 16
Output
The Output Tab shows you the present output values for the transmitter. To update the values, click the Read button
under the black box.
Output Mapping allows you to select the loop for each measurement. Loop #1 (or #2) can be set to indicate Level #1,
Level #2 or Temperature. Click Write after you make any changes. Click Read to see the existing setting.
Output Units allows you to set the units of measure for all data. Click the drop-down arrow and select the desired
value. Click Write to accept any changes. Click Read to see the existing setting.