Gossen STARLITE 2 - Manual (Page 30)

30 Gossen Foto- und Lichtmesstechnik GmbH
9.3 Setting the shutter angle
The shutter angle in the STARLITE 2 is preset at the
factory to 180°.
If you are working with other angles which vary from
the shutter angle 180°, you can enter these directly.
Therefore, no need for lengthy calculation.
- Simultaneously press both menu buttons ( and ).
The current angle appears in the right display.
- Set the required angle in 5° stop increments using the
setting wheel.
- By pressing a menu button ( or ) you move
back into the measuring function. The selected angle
is shown in the display with the symbol
.
A shutter angle other than 180° has a direct influence
on all measuring functions in the CINE function;
corrected measuring values are shown directly in the
display.
These angle correction values do not influence the
measuring results in the photometry function.
Unlike in the photo functions, correction entries
cannot be made here.