Gossen STARLITE 2 User Manual
Page 29
Gossen Foto- und Lichtmesstechnik GmbH
29
9
CINE meter for cinematographers
- PHOTOMETRY
By actuating the DIP 1 switch, the STARLITE 2 can be
converted easily and quickly into a fully functional
CINE meter. At the same time switch on the function
photometry.
CINE metere
- Select reflected light or incident light mode at the
measuring head.
- Using the left button, press menu ambient light
.
9.1 Preselecting the Cine speeds
- Press and hold the left menu button and
using the setting wheel set the speed “f/s”.
The function is shown in the display as
- Set the desired CINE speed using the setting
wheel.
- Contrast (chapter 5.4, page 18) and average
value measurements (chapter 5.5, page 19)
can also be carried out.
Using the switch DIP 2 additional CINE speeds
can be switched on.
9.2 Taking measurements in the CINE function
- Take a measurement by pressing the measuring
button
M
- The measured f-stop appears both in the left digital
display (resolution 1/10 stop increments) and as an
indicator in the analogue aperture scale rounded to
the nearest 1/2 f-stop.