Gossen STARLITE 2 - Manual (Page 10)

10 Gossen Foto- und Lichtmesstechnik GmbH
2.1.1 Automatic display illumination
When the lighting conditions are poor (about EV 4 or
less), the background lighting of the display is switched
on automatically for 10 seconds.
2.2 Display duration
If the STARLITE 2 display panel is idle for about
2 minutes, it is switched off automatically. The
measuring values and the preset values remain
stored in memory.
- By pressing anyone of the buttons, you can recall
the measuring value from the memory.
- By pressing the measuring button M , a new
measurement is taken.
The measuring values of the last measurement remain
stored in the memory until a new measurement is
taken.
The STARLITE 2 has separate memories for ambient
and flash light measuring.
2.3. Key Lock
lt makes sense to activate the key lock to avoid
switching on the STARLITE 2 by accident.
- Activating the key lock: press
ISO1 and IS02 simultaneously.
OFF, ISO and IS02 appear for 3 seconds on the
display. Then the instrument switches off
automatically.
If you press any button, OFF, ISO and IS02 are
displayed again for 3 seconds.
- Deactivating the key lock:
press
ISO1 and IS02 simultaneously.