Gossen STARLITE 2 - Manual (Page 22)

22 Gossen Foto- und Lichtmesstechnik GmbH
After each measurement using the measuring button
AVR the following data are stored and displayed:
- the symbol ZONE and the last measured value are
displayed on the left
- the number of measurements made are displayed
on the right (4 measurements in the example)
- on the zone scale the currently measured
values are indicated (identical values only
once) and the average of the brightest and
the darkest spot as a flashing dot
When the measuring process is completed and you
then switch over to the
“ambient light” function and
the desired measuring function, the value measured
in the zone V is displayed as shutter speed/f-stop
combination. Additionally, the flashing ZONE symbol is
displayed.
Now, you can select further shutter speed/f-stop
combinations using the setting wheel.
lf, by mistake, you take a zone measurement in the
incident light mode (flat or spherical diffuser), you are
reminded by the flashing diffusor symbol
that you have to set the diffuser ring to 1 ° spot
metering.
Black and white photography
Note down the subject contrast for the film
development and adjust the development time in
accordance with the contrast range.