Gossen STARLITE 2 - Manual (Page 11)

Gossen Foto- und Lichtmesstechnik GmbH 11
3 Operating elements
3.1 ISO - IS02
Selecting the film speed
You can select two different film speeds with the
ISO1 and IS02 buttons.
- Select the film speed by pressing and holding
"ISO1" or "IS02". ISO or IS02 will flash on the
display panel.
- Set the desired ISO value using the setting wheel.
When another operating function is selected,
the preset film speed is retained in the STARLITE 2
memory.
The film speed you have selected, either ISO1 or IS02,
appears in the top right corner of the display panel (IS02
as long as the
IS02 button is pressed).
When the IS02 button is pressed, the converted
shutter speed/f-stop values are displayed on the basis
of the last measuring. Therefore, you no longer have to
carry out time consuming calculations when working
with 2 films of different speeds.
If the film speed is changed, the last measuring value
is converted to the new ISO settings. The selected film
speed is memorized until it is changed in accordance
with the above mentioned procedure.