GBC Digicoil - Manual (Page 2)

2
Your safety as well as the safety of others is important to GBC. In this Operator Manual and on the DigiCoil itself
are important safety messages. Read these messages carefully.
The safety alert symbol precedes each safety message in this Operator Manual. This symbol
indicates a potential personal safety hazard that could hurt you or others, as well as cause product
or property damage.
The following warning for electrical shock hazard is found on the DigiCoil:
The following warning for hand crush hazard is found on the DigiCoil:
The following symbols appear on this product. Their meaning is:
Means START
Means STOP/RESET. Press once and the DigiCoil
Stops, press again and it Resets.
Means Open Spines
Means Manual Cut and Crimp
Means Cut and Crimp Setup
Means Automatic Cycle
SAFETY FEATURE
As a safety feature, the DigiCoil shuts itself down
when one of the side access panels are opened, the
E-STOP button is pressed, or there is a paper jam.
After such an occurrence, follow the instructions on
the LCD to continue operations.
ESTOP Switch – located on the
top of the unit. Red in color.
ccolor.