E-flite Mini ShowTime 4D ARF - Manual (Page 8)

8 E-flite Mini ShowTime ARF Assembly Manual
Landing Gear Installation
Required Parts
Fuselage
Main landing gear
Wheel pant (L&R)
1
3 /
4
-inch (45mm) wheel (2)
4-40 x 3/8-inch socket head screws (2)
#4 black washers (6)
4-40 nut (2)
4-40 locknut (4)
4-40 x 1-inch socket head screw (2)
2mm x 6mm wood screws (2)
Required Tools and Adhesives
Felt-tipped pen
Phillips screwdriver (small)
Drill
Drill bit:
1 /
16
-inch
Needle-nose pliers
Nut driver:
1 /
4
-inch
Hex wrench: 3 /
32
-inch
Note: You may consider using a larger diameter wheel,
such as 2 1 /
4
-inch (58mm) (EFLA224), if your flying site
has rough terrain. By using a larger wheel, you will not
be able to use the included wheel pants.
 1. Place the landing gear onto the bottom of the fuselage.
It will angle forward when installed in the correct
direction. Attach with two 4-40 x
3 /
8
-inch socket head
screws and two #4 black washers.