E-flite Mini ShowTime 4D ARF - Manual (Page 10)

10 E-flite Mini ShowTime ARF Assembly Manual
  5. Use a drill and 1 /
16
-inch drill bit to make a hole at the
location made in the previous step.
  6. Secure the pant to the landing gear with a 2mm x
6mm wood screw.
 7. Repeat Steps 2 through 6 for the remaining wheel
and wheel pant.
Outrunner Motor Installation
Required Parts
Fuselage
Brushless motor
4-40 x
3 / 8
-inch socket head screw (4)
#4 black washer (4)
Required Tools and Adhesives
Hex wrench: 3 /
32
-inch
Screwdriver (Phillips #0)
Note: This section covers the installation of the
recommended Park 480 Outrunner motor. The holes in
the firewall match the mounting pattern of the X-mount.
 1. Attach the supplied aluminum motor X-mount to the
motor using the screws provided with the motor. The
wider section of the mount will be positioned toward
the motor wires.