E-flite Mini ShowTime 4D ARF - Manual (Page 30)

0 E-flite Mini ShowTime ARF Assembly Manual
 4. Use medium grit sandpaper to roughen the covering
1 /
8
-inch (3mm) inside the line drawn. Also roughen the
outside 1 / 8
-inch (3mm) of the canopy. Clean the sanded
areas using a paper towel and rubbing alcohol.
 5. Use Formula 560 canopy glue to glue the canopy to
the fuselage. Use masking tape to hold the canopy in
position until the glue fully cures.
 6. Remove the battery hatch from the fuselage by pulling
upward on the tab.