E-flite Mini ShowTime 4D ARF - Manual (Page 12)

1 E-flite Mini ShowTime ARF Assembly Manual
 1. Solder any connectors to the speed control to connect
to the motor battery and motor if necessary. Connect the
ESC to the motor and secure it to the bottom of the motor
box using hook and loop material. Actual ESC location
may vary but proper air flow and cooling is important.
 2. Connect the speed control to the radio system and
motor battery. Check that the motor is rotating in the
correct direction. It will rotate counterclockwise when
viewed from the front of the aircraft. Use the instructions
with your speed control to correct a motor that is
operating in the wrong direction.
 3. Slide the propeller adapter through the hole in
the propeller.
 4. Slide the 1 /
2
-inch (13mm) plastic washer onto the
adapter.